There are 12 Termite Monitoring Stations in a carton, this is enough for an average sized home. Place the Termite Monitoring Stations around the external perimeter of your house i.e. Gardens, paths, near wood piles, etc.
No digging or drilling is required. This is the simplest and most effective Termite monitoring station on the market.
Termite ‘scouts’ leave the nest to forage for food. Once they locate the monitoring station that is loaded with Tasmanian Oak (a very attractive timber to termites) they immediately move in.
By placing traps around your house and garden you provide termites with an easy-to-find food source – once they have found the trap, they move in, seal it up, make it their own. Because of the nature of the design and that they hold Tasmanian Oak, the idea is for the Termites to find the Termite Monitoring Stations BEFORE they find your house.
It is recommended to check the monitoring stations regularly for active termites – usually every 2-3 months.
Once Termites are active in a Termite Monitoring Station you can then bait them with Colony Killer Termite Baits (sold separately) and eliminate the colony. After a successful baiting, they can be refilled with more timber so the monitoring cycle continues.
STEP 1: PLACING THE TRAPS
These are some of the areas suitable for placing the traps.
Around the outside of the house
Near expansion joints in concrete
Near previously damaged timbers
Near wood and wood piles in garden
STEP 2: INSPECTING THE TRAPS
The patented design of the Termi-Brick allows you to quickly and easily see which traps have attracted termites – without disturbing them.
Once inside the trap, their instincts drive them to block up the hole with mud.
Once you find traps with this mud “we’ve arrived” signal, this is your cue to start the baiting process.
No Termites – Keep walking, check other stations
Termites have arrived – Time to start baiting
STEP 3: ADDING THE BAIT
Termite Trap Colony Killer Bait contains an insect growth inhibitor called chlorfluazuron.
It is deadly to the life cycle of the termites – but completely safe to you, your family, pets and wildlife.
By using this bait you can kill off whole termite colonies – not just termites that you may have found in and around your house.
Here’s how you do it.
1. A carton of bait includes 10 conveniently sized individual containers. Remove the lid and add 330ml of water.
2. Once the water’s soaked in (no need to stir) lightly replace the lid and remove this disc from the bottom.
3. The bait container fits neatly onto the top of the trap – you press a little of the bait down into the Trap to get them started . . .
4. . . and lightly close the lid… one click on one side.
The termites take the bait back to the colony where it not only kills them – but the whole nest! It will take multiple feeds but it is the most certain way to kill termite colonies.
You are now an expert in the use of the simple but deadly TermiteTrap.
Specifications:
12 Monitoring Stations Included.
Colony Killer not included (please purchase seperately).
